信息類型：供應(yīng)

FEATURES
◆ 16M-bit Serial Flash ◆ Program/Erase Speed
-2048K-byte -Page Program time: 0.7ms typical
-256 bytes per programmable page -Sector Erase time: 50ms typical
-Block Erase time: 0.2/0.28/0.6s typical
◆ Standard, Dual, Quad SPI -Chip Erase time: 10s typical
-Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#
-Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD# ◆ Flexible Architecture
-Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3 -Sector of 4K-byte
-Block of 32/64/128K-byte
◆ High Speed Clock Frequency
-120MHz for fast read with 30PF load ◆ Low Power Consumption
-Dual I/O Data transfer up to 180Mbits/s -20mA maximum active current
-Quad I/O Data transfer up to 360Mbits/s -5uA maximum power down current
◆ Software/Hardware Write Protection ◆ Advanced security Features
(1)

-Write protect all/portion of memory via software -16-Bit Customer ID
-Enable/Disable protection with WP# Pin -Security Architecture
-Top or Bottom, Sector or Block selection
◆ Single Power Supply Voltage
◆ Minimum 100,000 Program/Erase Cycles -Full voltage range:2.7~3.6V
Note: 1.Please contact Gigadevice for details.
GENERAL DESCRIPTION
The GD25Q16 (16M-bit) SPI flash s upports the standard Serial Peripheral Interface (SPI), and supports the
Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). The Dual I/O
data is transferred with speed of 180Mbits/s and the Quad I/O & Quad output data is transferred with speed of
360Mbits/s